Title COMPRESSIVE STRESSES AT AN ANGLE TO THE GRAIN EUROCODE 5 This case allow calculate compression at an angle to the grain following Eurocode 5 in all situation. Other functions may be more intuitive and friendly. Please do not hesitate to contact us with any queries.  `/CompressiveStressesAtAnAngleToTheGrainEURO/api?falfaD=1&b=90&l=70&l1=70&c1=0&c2=30&h=300&Continuous=false&s=GL24h&service=1&LoadDuration=S&gammaM=1.25&alfaGr=30.5&format=json` `GET` Required: `falfaD =[Integer]` Is the design force in Newtons (N) example: falfaD=1 `b =[Integer]` Width measured in millimeters(mm) example: b=90 `l =[Integer]` Is the contact length measured in millimeters (mm) example: l=70 `l1 =[Integer]` Distance between contact areas measured in millimeters (mm). example: l1=70 `c1 =[Integer]` Increased contact length at each side by 30·senα mm, but not more than a, l or l1/2. The system considered the minimum of these values. Measured in millimeters (mm). example: c1=0 `c2 =[Integer]` Increased contact length at each side by 30·senα mm, but not more than a, l or l1/2. The system considered the minimum of these values. Measured in millimeters (mm). example: c2=30 `h =[Integer]` Depth measured in millimeters (mm) example: h=300 `continous =[true|false]` Design parameter. Introduce true or false for continuous support to continuous design or discrete design, respectively. example: continous=true `s=[StrengthValue]` The alpha-numeric code of the strength classes. A value from the next lists: Softwood: C14, C16, C18, C20, C22, C24, C27, C30, C35, C40, C45 or C50. Hardwood: D18, D24, D30, D35, D40, D50, D60 or D70 Homogenous Glue Laminated: GL20h, GL22h, GL24h, GL26h, GL28h or GL30h Combined Glue Laminated: GL20c, GL22c, GL24c, GL26c, GL28c or GL30c example: s=C14 `service =[1|2|3]` The service class is indicated by introducing the number of the corresponding service class, 1, 2 or 3 example: service=1 `LoadDuration =[I|S|M|L|P]` Load duration is indicated by introducing one of the following parameters : I, S,M L or P example: LoadDuration=S `gammaM =[float]` Partial factor for material properties, also accounting for model uncertainties and dimensional variations. This input is a number. example: gammaM=1.25 `alfaGr =[Integer]` Angle between the force and the grain direction measured in degrees. example: alfaGr=300 `format=[xml|json]` Choose the language you wish the output to be in. Indicate either json or xml. example: format=json Example: Code: 200 Example content: `{"areaEf":"6300","kc90":"1.00","fcalfaD":"5.37","index":"0.00"}` areaEf= Effective contact area in compression perpendicular to the grain measured in mm2. kc90= is a factor taking into account the load configuration, the possibility of splitting and the degree of compressive deformation. fcalfaD= Design compressive stress at an angle to the grain measured in N/mm2. index= This value checks the 6.3 formula of EN 1995-1-1:20004+A1:2008 and should be lower or equal than 1.

#### If you like our app please consider making a donation 